PC

6 Ways to Boot Windows 10 in Safe Mode

11 Facts You should Know About Windows 10
6 Ways to Boot Windows 10 in Safe Mode - PC -Safe Mode has usually been the key element for troubleshooting many of windows problems

Safe Mode has usually been the key element for troubleshooting many of windows problems. Inside the safe Mode, home windows load with only the required drivers and files, for this reason, continues now not-required files and application at bay that may be inflicting the problem. There are more than one methods to access secure Mode in windows, and understanding all of the approaches may be very important. You never recognise how a home windows problem may additionally restriction your home windows use, like what if you could’t even get right of entry to the login screen? In such conditions, understanding distinct ways to access secure Mode will assist.

Strategies to access safe Mode in windows 10 are a little one of a kind from Windows 8, and in particular Windows 7. That is why we’re going to listing down 6 different techniques to access secure Mode in home Windows 10. These techniques should be enough to help you access safe Mode even in the worst conditions.

: Always Launch Windows 10 in Safe Mode

You could configure Windows 10 to always release in safe Mode from the machine Configuration dialog. That is on hand in case you are troubleshooting a Windows problem and want to open home Windows 10 constantly in safe Mode for the session. To achieve this, press Windows+R keys to open “Run” and input “msconfig” in it. Now click on “ok”and “System Configuration” conversation will open up.

6 Ways to Boot Windows 10 in Safe Mode

Right here flow to the “Boot” tab and select Windows 10 on the top (if there are a couple of options). Now under “Boot options”, select “safe boot” and safe Mode type. You may hold it to “minimal” in case you want to get admission to the normal secure Mode.
Otherwise, “alternate shell” and “network” modes are also to be had for launching secure Mode with Command prompt or network access. While you’ll click “Ok” to apply the adjustments, you may be brought on to restart without delay or later. Choose the right choice as you desire. when restarted, home Windows 10 will release inside the secure Mode.

6 Ways to Boot Windows 10 in Safe Mode

6 Ways to Boot Windows 10 in Safe Mode

However, this modify is permanent and Windows 10 will always load in the Safe Mode. So you will have to go to System Configuration dialog again and uncheck “Safe Mode” under Windows 10.

Press F8 to Boot into Windows 10 Safe Mode

Pressing F8 even as Windows is loading has constantly been the best way to boot home Windows into secure Mode. Unfortunately, Windows 8 and Windows 10 boot too rapid (with the right hardware) that the F8 keystroke isn’t always even diagnosed. But, the boot speed relies upon for your pc’s BIOS and whether or not you are using SSD or not. If you are still using an older pc that runs on older BIOS and also has a hard drive rather than SSD, then the F8 trick may fit in your Windows 10 laptop as nicely.

If that’s the case, then swiftly press F8 key even as home Windows 10 is loading and also you should see startup alternatives in which secure Mode alternative will also be available.

READ  Resize Image Without Loosing Quality – How To Guide

6 Ways to Boot Windows 10 in Safe Mode

Note: If you are dual-booting, ensure that Windows 10 is set as the default OS. You can set it as default OS from the same “Boot” options in the “System Configuration” dialog that we accessed in the method #1.

Hold Shift and Restart

You can also hold the Shift key and restart the PC to access troubleshoot boot options. From there you can navigate and access the Safe Mode. Open Start menu and click on the “Power” button. Now press and hold the “Shift” key and click on the “Restart” button. This combination will work from both Windows Shutdown dialog (Alt+F4) and also the Sign-in screen.

6 Ways to Boot Windows 10 in Safe Mode

This will restart your PC and open some basic boot options, click on “Troubleshoot” from these options. In the Troubleshoot option, you will see an option to Reset Windows 10 and an option to access “Advanced options”, click on “Advanced options”.

6 Ways to Boot Windows 10 in Safe Mode

6 Ways to Boot Windows 10 in Safe Mode

Here click on “Startup Settings” and then click on “Restart” to access advanced boot options.

6 Ways to Boot Windows 10 in Safe Mode

Your computer will restart once more and load superior boot alternatives. There might be many alternatives inclusive of safe Mode alternatives, and you will should use numerical keys or feature keys (F1, F2, F3) to select the proper option. The minimum safe Mode is 4th within the listing and can be accessed with the numeric key four (or F4). You could get right of entry to safe Mode with network and safe Mode with Command prompt get admission to with numeric key five (F5) and six (F6) respectively.

6 Ways to Boot Windows 10 in Safe Mode

Add Safe Mode Option in the Boot Menu

You could additionally add the safe Mode alternative in the boot menu along different operating system to without problems get right of entry to it whenever you restart your pc. That is extremely on hand in case you want to get access to safe Mode regularly or when you can’t access Windows 10 in any respect. However, this requires a bit setup, but don’t worry we are right here to guide you via the whole procedure. For this purpose, we are able to first have to create an entry in the boot menu and then assign the desired safe Mode option to it.

READ  WinX MediaTrans iPhone Manager for PC (Review)

To make an entry in the boot menu, right-click on the start menu icon (or press Windows+X) and select “Command Prompt (Admin)” from it. This will open an elevated Command Prompt Window, here enter the below mentioned command and press the “Enter” key.

bcdedit /copy {current} /d “Launch Windows 10 Safe Mode”

6 Ways to Boot Windows 10 in Safe Mode

6 Ways to Boot Windows 10 in Safe Mode

This will make an entry in the boot menu with the name “Launch Windows 10 Safe Mode”. Here “Launch Windows 10 Safe Mode” is the name of the entry, so you may edit this section as you please to put your desired name. You can also repeat the process and change entry names to create multiple entries, perfect if you are planning on creating entries for Safe Mode with Networking and Command Prompt as well.

Now that the entry is created, let’s assign Safe Mode function to it. Go to System Configuration again by typing “msconfig” in the “Run” dialog, just like we did in method #1. Here move to the “Boot” tab and select the new entry you just created. Now select “Safe boot” from the “Boot options” and select the Safe Mode type below it. Also, make sure “Make all boot settings permanent” option is checked. When you will click on “OK”, you will be prompted to restart immediately or restart later, just choose the desired option and the Safe Mode entry will be added in the boot menu.

6 Ways to Boot Windows 10 in Safe Mode

6 Ways to Boot Windows 10 in Safe Mode

Later if you change your mind and want to remove this entry from the boot menu, just access System Configuration again and select the entry. Now just click on “Delete” and it will be immediately deleted.

READ  5 Best Open Office Alternatives for Windows, macOS and Linux

Use a Windows 10 Recovery Drive

When you have already created a windows 10 recovery USB drive or disk, then you could use it to get right of entry to safe Mode. This is available if you are caught out of doors of the home windows and didn’t setup to load it in safe Mode. connect the recovery USB power in your laptop and boot it. You must see a “choose an option” screen with choice to load content material from the USB pressure in conjunction with a few different options, which includes “Troubleshoot”. right here choose “Troubleshoot” and relaxation of the system is same as we’ve got accomplished within the technique #3.

6 Ways to Boot Windows 10 in Safe Mode

Force Windows 10 To Load the Boot Options

That is a little harsh option, but it can be a lifesaver in case you don’t have access to in your windows recovery drive and different strategies aren’t working for some purpose. If you will interrupt windows 10 from loading 2-three instances, it’s going to automatically provide you with simple boot options to select “Troubleshoot” option after which navigate to safe Mode the use of the commands in the technique #3.
Start windows 10 and while you see its brand with dots circling underneath it, press and hold the pc’s energy button. This can force you to shutdown the computer after a brief delay. Repeat this process 2-three times and you have to see home windows saying “Loading Repairing options” while loading home windows 10. This time, don’t shutdown the pc and permit it entire the procedure. Simple boot options will load up, simply select “Troubleshoot” right here and follow the instructions in the technique #3 to get access to the safe Mode.

Conclusion

Above we have stated 6 best methods to boot Windows 10 in safe mode that should be enough to allow you to access Safe Mode when needed. I will recommend you to add a Safe Mode entry in the boot menu to make sure you always have the option to access Safe Mode even if the Windows 10 is not booting. However, if you didn’t set it up before the unexpected happen, then a Recovery disk or force shutdown should help access Windows 10 in Safe Mode.

Do you know any other ways to enter Safe Mode in Windows 10? Share with us in the comments below.

About the author

Wikitechy Editor

Wikitechy Editor

Wikitechy Founder, Author, International Speaker, and Job Consultant. My role as the CEO of Wikitechy, I help businesses build their next generation digital platforms and help with their product innovation and growth strategy. I'm a frequent speaker at tech conferences and events.

Add Comment

Click here to post a comment

X